Atten Soldering Equipment

Atten ST-80 Digital Soldering Station 80W

The Atten ST-80 soldering station has a qualitative heating element with 80 Watts of power.
The ST-80 comes with a user-friendly LCD display. The soldering station automatically lowers the temperature to 150°C in rest mode. This is done for a longer life of the soldering tip. Furthermore, 3 buttons for adjustable temperature settings are available and it can heat up to 350°C in about 15 seconds.
The ST-80 also has a temperature-lock function which enables the user to lock the temperature. The soldering iron comes with a soldering holder.
Soldering Iron 80w Soldering Iron Temperature Range 150-450°C
Uses Hakko 900M series tips
Includes station, soldering iron & tip, sponge

Atten ST-9003D IOT High Frequency Soldering Station 90w

• 90W high frequency soldering station with LCD display.
• Pluggable heater design, easy to replace.
• 3 temperature presets to simplify operations.
• Temperature range from 80℃ to 500℃.
• Supports IR temperature calibration function.
• Built-in RS-485 communication interface, support IoT function.

Features

• Easy Temperature setting
• Temperature lock function
• Temperature calibration
• Auto standby & Auto sleep functions
• Alarm function
• Password protection

Atten ST-1203D IOT High Frequency Soldering Station 120w

• 120W high frequency soldering station with LCD display.
• Pluggable heater design, easy to replace.
• 3 temperature presets to simplify operations.
• Temperature range from 80℃ to 500℃.
• Supports IR temperature calibration function.
• Built-in RS-485 communication interface, support IoT function.

Features

• Easy Temperature setting
• Temperature lock function
• Temperature calibration
• Auto standby & Auto sleep functions
• Alarm function
• Password protection

Atten ST-8802 Combination Soldering & Hot Air Station

The Atten ST-8802 is a good extension for any workspace. The station can be used for both soldering and repair applications. The station features three temperature preset keys and has a password protection/key lock function. The brushless vortex fan ensures a more gentle and evenly spaced air output. Furthermore, the soldering iron and hot air gun can be used at the same time. The station has a large LCD screen and big buttons with which the soldering and hot-air settings can be separately adjusted. All information about both the soldering and hot-air parts is shown on the screen at the same time. With a touch sensor the auto sleep function will take effect immediately when the hot-air gun is placed back in to the stand. Furthermore, the station has a cooling function that cools down the gun extending the work life of the heating core and handle.

• Soldering Iron 65w.
• Soldering Iron Temperature Range 80-480°C.
• Uses Hakko 900M series tips.

• Hot Air Rework 800w.
• Hot Air Temperature 100-500°C.
• Hot Air Volume 120L/min

Includes 2x stands, soldering iron & tip, hot air handpiece, hot air nozzles 2.5mm, 5.5mm, 7.4mm, 9.4mm

Atten ST-862D Hot Air Rework Station 1000w

The Atten ST-862D hot air soldering station has high power of 1000W. This makes sure that the soldering station reaches the operating temperature quickly.
With two temperature buttons, the temperature is easily set between 100℃ and 480℃.
Three presets make it possible to save temperatures.
LED display.
Air flow can be adjusted by the air keys.
The hot air station is convertible with straight and spiral air, has an auto-sleep function and a heating element overheating detection.

Power 1000w
Temperature Range 100-480°C

Includes station, iron holder, 4x nozzles (5.0mm, 6.4mm, 8.0mm, 10mm)

Atten GT-5150 Desolder  Station 150w

The ATTEN GT-5150 Desoldering station is an intelligent digital soldering station with 150W heating element for temperatures from 150-480 ° C. 

Big silicone buttons make  operation comfortable and reliable.
Large graphic display.
Three preset temperature parameters to simplify operations.

Temperature Range: 250-480°C
Vacuum Pressure: -600mmHg
Voltage: AC 110V +-10%; 230V +-10%
Frequency: 50Hz 230V / 60Hz 110V
Power: 150W

Atten ST-1016 Desktop Smoke Absorber

High performance fan
2 positions for smoke absorbing, Vertical or Horizontal
Air Volume: Vertical 60m3/hour, Horizontal 24m3/hour
Includes LED light

Atten ST-1090 Tip Thermometer

Large LCD screen.
Accurate temperature measurement 0-800℃.
Performance stable and easy to operate.
IR temperature calibration.
USB communication function.
Automatic shut down function.

Includes pack-10 temperature sensors.

Atten ST-680D Thermal Wire Stripper

A thermal wire stripper that allows you to strip cables with extra precision. Due to heating, there will be no cuts or nicks in the cable.

LCD Screen 
Ergonomic handpiece
Strip cables such as PVC, PE, PA, PVDF, ETFE, SI, PTFE

Unit includes screwdriver, wire brush and 18-28AWG wire stripper blade

Atten AT-B778 Vacuum Pick Up Tool

The pen body is made of high quality material for long service life.
Compact appearance and lightweight, easy to be stored in your bag and carry around.
The vacuum pen uses the vacuum principle, it is specially designed for picking up small electronic components. It is a good practical pickup tool for IC, SMD and other parts, up to about 50g.
This vacuum suction pen kit includes 2 suction nozzles and 6 suckers.
Soft suction cups avoid scratch or damage to sensitive parts, has strong sucking power and high reliability.
One button to operate, easy to use.