Desoldering Equipment

Desolder Wicks

Goot CP-1015 Desolder Wick 1.0mm x 1.5m

Goot CP-1515 Desolder Wick 1.5mm x 1.5m

Goot CP-2015 Desolder Wick 2.0mm x 1.5m

Goot CP-2515 Desolder Wick 2.5mm x 1.5m

Goot CP-3015 Desolder Wick 3.0mm x 1.5m

JBC CS-2F Desoldering Station with Electric Pump 40w

The CS / CV Station is equipped with a Desoldering Module and is ideal for desoldering the smallest plated through hole components and removing solder from surface mount pads.
There are two models, the CS which works with an electric pump and the CV which works with compressed air supply. This Station comes with the comfortable DS360 Micro Desoldering Iron which uses the JBC exclusive Heating System and the intelligent Sleep & Hibernation features.
As all the Compact Stations, the CS / CV has a menu with more than 10 parameters to customize the control unit.
The JBC CS Micro Desolder Station with Electric Pump is a desoldering station with the JBC Advanced system for precision electronic applications.
It works with the JBC exclusive heating system and the intelligent sleep & hibernation features. Using the menu you can personalize over 20 parameters to help manage the soldering process. JBC CS Micro Desolder Station With Electric Pump incorporates a USB connector (type B) to update station software and create graphs. The JBC CS Desolder Station is equipped with the MS-A electric pump and works with the comfortable DS360 Micro Desoldering Iron and C360 cartridge range.

JBC CS-2E Product Composition
CSV Control Unit
MV-A Pneumatic Desoldering Module
DS360-A Micro Desoldering Iron
C360002 Through hole desoldering Ø 0.8
C360004 Through hole desoldering Ø 1.2

Hakko FM-204/FM204 Desolder Station 70w

The FM-204 bench top desolder station has a built-in internal vacuum pump and as standard a changeable handle to either pencil or gun grip for through-hole component removal. The FM-204 is supplied with station, desoldering handle tool, iron holder and 599B tip cleaner along with nozzle remover tool, ceramic filters, filter pipe assembly and cleaning drill.

• Temperature range 350 - 450°C
• Suction flow 15L/min
• Sleep function
• Auto shut-off
• Includes 1.0mm tip, filters and stand

Hakko FR-410/FR410 Desoldering Station 140w

As the design of PCBs evolve, the need for higher power desoldering tools with a wide arrange of nozzle configurations grows. The HAKKO FR-410 desoldering station is designed to fit that need and bridge the gap in power between the 70W HAKKO FM-204 desoldering station and the 300W HAKKO FR-400 ultra heavy duty desoldering station.
The HAKKO FR-410 provides 140 watts of power and has the widest selection of nozzle configurations that can meet almost every need. The station includes the same popular features from the HAKKO FR-400, which include an anti-clogging feature that helps ensure instantaneous application of peak vacuum pressure to the solder joint.

Features:

• Heavy-duty Desoldering Tool with built-in vacuum pump.
• Quick and secure desoldering even on high heat capacity and high heat dissipation PWB with super power
• Secure desoldering with valve function.
• Solder clogging reduced with Anti Clogging Function
• 300w element, suction flow 15L/min
• 0.8mnm to 3mm nozzles available
• Temperature range 350°C ~ 500°C

Hakko FR-400/FR400 Desoldering Station 300w

The Hakko FR-400 Ultra Heavy Duty desoldering station is specifically designed for the difficult rework of extremely large mass components, such as high current inductor coils, heat sinks, large transformers, shields, and other connections where there is a significant amount of thermal inertia that must be overcome.

Features:

• Heavy-duty Desoldering Tool with built-in vacuum pump.
• Quick and secure desoldering even on high heat capacity and high heat dissipation PWB with super power
• Secure desoldering with valve function.
• Solder clogging reduced with Anti Clogging Function
• 300w element, suction flow 15L/min
• 0.8mnm to 3mm nozzles available
• Temperature range 350°C ~ 500°C