Products Include:

• Soldering Irons (40w-110w)
• Soldering Stations (Lead & Lead-Free)
• High Power Soldering Stations
• Solder Pots (Lead & Lead-Free)

• Portable Desolder Gun & Desoldering Station
• Solder/Desolder (Rework) Station
• Solder Reel Holders
• Soldering Iron Stands

Goot RX-711AS Soldering Station

60W heat capacity allows faster temperature recovery during heavy soldering, reducing the reaction time even at lower temperature settings.
Temperature range: 200-480°C, Digital display, Comfortable ergonomic soldering iron handle. Antistatic model.
Replacement handpiece and range of tips available.

Goot RX-802AS Soldering Station

72w Digital Station

6 seconds to set temperature.
Great solution for lead free soldering.
Unique slide change tips, change tips even while hot.

Various replacement tips available.
Also spare handpieces, sponges, tip cleaners.
Optional Soldering Tweezers available (see below)

 

Goot RX-822AS Dual Soldering Station 150w + 72w

Goot RX-822AS is a High-Wattage (150 Watt) + 72w Dual ESD Safe Temperature Controlled Soldering Station that offers fast heating and excellent thermal recovery. This station can easily, quickly and conveniently solder any composition of lead or lead-free solder alloy.

High Power 150w Handpiece included + optional ability to use RX-80GAS Handpiece & RX-80HRT Tips (72w handpiece), RX-81GAS Micro Handpiece, XST-80G Hot Tweezers
Temperature range 50-450°C
Sleep function
Shutdown Function
High/Low Temperature Alarm
Soldering Alarm Function
Note 1x 150w handpiece included only. Tips not included

Goot RX-852AS High Power Soldering Station 150w

Goot RX-852AS is a High-Wattage (150 Watt) ESD Safe Temperature Controlled Soldering Station that offers fast heating and excellent thermal recovery. This station can easily, quickly and conveniently solder any composition of lead or lead-free solder alloy.

High Power 150w Handpiece
Temperature range 50-450°C
Sleep function
Shutdown Function
High/Low Temperature Alarm
Soldering Alarm Function
Ability to use RX-80GAS Handpiece & RX-80HRT Tips (80w handpiece), RX-81GAS Micro Handpiece, XST80G Hot Tweezers
Note tip not included

Solder Pots

Goot POT-21C Solder Pot
Stainless Steel bath, suitable for lead solder. 36x36mm pot

Replacement elements and baths stocked. Both feature flexible silicone power cable.

 

Goot POT-28C Solder Pot
Cast Iron bath, suitable for leadfree.
34x32mm pot

Replacement elements and baths stocked. Both feature flexible silicone power cable.

Goot TP-100 Portable Desolder Gun 75w

Compact design with an internal motor, pump, and temperature-control circuit built into the grip. Removes through-hole solder easily. Sensor feedback system for temperature recovery and control.

• Temperature range 250 - 450°C
• 75w ceramic heater
• Suction flow 11L/min
• Weight 470gm
• Includes 1.0mm tip, carry case
• Spare filters and tips (0.8-2.5mm) available

Goot TP-280AS ESD Desolder Station 85w

With an open-valve mechanism (400% More Suction Capacity, compared with standard model) allows the station to reach vacuum pressure of 450mmHG in 0.1second. Applicable for a wide range of soldering work, terminals, connectors and flat ICs Ceramic Heater with Internal Sensor.
Superior Temperature-Control Circuit
Reduces noise during heater ON/OFF (Zero Volt Switch Circuit)
Replaceable Cartridge Filter
Includes stand, 1.0mm tip, cleaning tip

• Temperature range 250 - 450°C
• 85w ceramic heater
• Suction -600mmHG
• Includes 1.0mm tip, stand
• Spare filters and tips (0.8-2.5mm) available

Goot SVS-580AS ESD Solder/Desolder Station

The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1 second (about 4 times faster than our SVS-500AS). Zero Volt Switch Circuit reduces noise during heater ON/OFF. Two-stage trigger switch - pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

Desoldering Unit 85w
Desoldering Temperature 250-450°C
Vacuum –0.08MPa (-600mmHg)
Soldering Iron 70w
Soldering Temperature 250-480°C
Includes TP-100N-S5
(1.5mm slim nozzle) & PX-2RT-B (0.5mm conical tip)
Uses TP-100N Nozzles & PX-2RT Soldering Tips

Desolder Pumps

Goot GS-108 Solder Sucker 190mm length

Goot GS-100 Solder Sucker  330mm length

Goot GS-158 Solder Sucker 190mm length, antistatic

Replacement nozzles available for all sizes

Desolder Wicks

Goot CP-1015 Desolder Wick 1.0mm x 1.5m

Goot CP-1515 Desolder Wick 1.5mm x 1.5m

Goot CP-2015 Desolder Wick 2.0mm x 1.5m

Goot CP-2515 Desolder Wick 2.5mm x 1.5m

Goot CP-3015 Desolder Wick 3.0mm x 1.5m

 

Goot CP-15B Desolder Wick 1.5mm x 30m

Goot CP-20B Desolder Wick 2.0mm x 30m

Goot CP-25B Desolder Wick 2.5mm x 20m

Goot CP-30B Desolder Wick 3.0mm x 20m

Goot CP-35B Desolder Wick 3.5mm x 20m

YN-20 Goot Diagional Micro Nippers
Flat cutting edges that do not put any load on the body of the component.
For cutting precision components, lead wires, etc.
Maximum wire diameter 1.6mm.
Size 140mm (5.5”). Made in Italy.

YN-104 Goot Platform Nippers
Cuts wires 1.5 mm from the PCB surface.
Maximum wire diameter 1.3mm.
Size 140mm (5.5”). Made in Italy.

YP-10 Goot Serrated Long Nose Pliers
Highly accurate long nose pliers.
Tip 1.2mm square.
Size 160mm (6.3”). Made in Italy.