Desoldering Equipment

Quick 957DW+ Hot Air Rework Station 580w

Closed loop sensor, large power, rapid heating, precise and stable temperature not affected by air volume. DC brushless motor with soft rotating air, stepless and wide range of air volume. With an inductive switch, the unit enters the standby status when placing the handle on the iron holder, save energy.

Auto sleep function
Power: 580W
Temperature Range: 100°C-450°C
Maximum Airflow: 1-50L/min

Includes 3x nozzles (4.4mm, 6.4mm, 8.4mm)

JBC JTSE-2QB Hot Air Rework Station 700w

The JBC JTSE-2QB is a high powered hot air station for repairing all types of SMDs quickly and safely, including the biggest QFPs and PLCCs.
JBC 230 V - Hot Air Station Without Extractor Desk features two work modes -manual or program- to manage efficiently the temperature and the hot air flow.
Using the menu you can personalize over 20 parameters to help manage the soldering process.
It works with the JT-TA heater and features a USB-B connector for software updates. It comes with the JT-SD Stand that guarantees the Auto-stop function when the tool is at rest.

JTSE-2QB Product Composition
1 JTSE-UA Hot Air Control Unit
JT Heater Hose Sets
JN2015 Nozzle for JT heater
JN2012 Nozzle for JT heater
JN2020 Nozzle for JT heater
JT-SE Stand for JT heater
PH218 Thermocouple Type K

Atten ST-862D Hot Air Rework Station 1000w

The Atten ST-862D hot air soldering station has high power of 1000W. This makes sure that the soldering station reaches the operating temperature quickly.
With two temperature buttons, the temperature is easily set between 100℃ and 480℃.
Three presets make it possible to save temperatures.
LED display.
Air flow can be adjusted by the air keys.
The hot air station is convertible with straight and spiral air, has an auto-sleep function and a heating element overheating detection.

Power 1000w
Temperature Range 100-480°C

Includes station, iron holder, 4x nozzles (5.0mm, 6.4mm, 8.0mm, 10mm)

Quick 861DW Hot Air Rework Station 1000w

A multipurpose unit, having brushless whirlpool motor, wide range and stepless adjustable airflow.
Automatic cooling system which prolongs the life of the heating element.

Features three presets/channels.
Each preset’s parameter including temperature and airflow can be set
Password protection and key-lock functions
Auto sleep function
Power: 1000W
Temperature Range: 100°C-500°C
Maximum Airflow: 1-120L/min

Includes 3x nozzles (4.4mm, 6.4mm, 8.4mm)

Hakko FR-810B/FR810B Hot Air Rework Station 1000w

The HAKKO FR-810B Hot Air Rework Station sets a new bar for convective rework. The new, compact and lightweight design (only 3.3 lb.) features a quiet, self-contained turbine air supply, capable of delivering up to 115 L/min.. The new heating element design improves durability, provides a top end temperature of 600°C and eliminates the quartz glass insulator tube. The FR-810B includes an integrated vacuum pickup system that includes a visual indicator for reflow, allowing the operator to visually see when the component has completely reflowed and is safely lifted from the PCB. This special feature allows the operator to lift the handpiece without fear of damaging the pads or leads. Additionally, new N51 Series quick-change hot air nozzles for SMT components that are specifically designed for use with the new vacuum pickup system are also available. These newly designed nozzles are compatible with the HAKKO FR-810B and FR-810, and the “older” nozzles from the HAKKO FR-810, FR-803B, FR-802 and FR-801 hot air stations are also compatible with the FR-810B.

Self Contained air supply
Airflow 100L/min (free flowing)
Slim handpiece with control buttons for start/stop function
Automatic safety cool down
5 programmable settings for temperature and airflow
Temperature range 50 ~600°C
Auto power off
Includes N51-02 tip

Hakko FR-811/FR811 Hot Air Rework Station 1170w

The FR-811 is a complete SMD rework system, featuring dual thermocouple inputs for part and board monitoring, PC integration via USB port with Hakko software, an additional external USB port for flash drive memory for storage of profiles, onboard storage of up to 50 profiles, manual and auto modes, auto teach mode for profiling and password lockout.

New graphic interface display and navigation system that simplifies operation
Dual Thermocouple inputs allow users to monitor part and board temperatures while controlling the ramp rate for a safe, accurate and repeatable process
Automatic mode gives users the ability to fully program profiles with up to 6 stages
Onboard storage of up to 50 profiles with an external USB port for flash drive memory for storage of profiles
A dedicated USB port can also be used to integrate the FR-811 with a PC using the included software
Integrated vacuum pickup with a visual indicator in the handpiece that indicates when the component has been completely reflowed

Quick TR1300A Hot Air Rework Station 1300w

With constant air flow, abundant heat and high efficiency, the Quick TR1300A is particularly suitable for special application reworking, such as low-temperature, big components and high heat-consuming.

Large power design, ensure sufficient heating, smart distribution, maximum power up to 1300W
Output constant airflow, unaffected by nozzle dimensions and nozzle tube deformation
Zone heating design, preheating and fast reworking combined together, realizing high efficiency and safety
Password lock function, preventing production process parameters from being changed with permission
3 different temperatures can be switched fast, meeting different soldering process
Real-time monitoring of ESD grounding function, ensuring ESD safety of soldering products
Touch type sleep function
Machine On-Off via software, low standby power
Auto power off function, decreasing consumable parts cost, saving energy
Temperature range 100-500 ℃
Air volume 6-70 L/Min

Includes 3x nozzles (4.4mm, 6.4mm, 8.4mm)